Garage Door Spring Replacement
Has your garage door been acting up lately? Have you noticed it becoming more difficult to lift, unusual noises when opening or closing, or uneven movements? If so, the problem likely lies with your garage door springs. As the components responsible for counterbalancing the weight of garage doors, broken or worn out springs can prevent your door from functioning properly.
Replacing damaged springs is crucial for restoring safe and smooth operation of your garage door. But due to the complexity involved and potential dangers, many homeowners opt to hire professional Jennings Garage Door Service technicians to complete the spring replacement process.
This article will provide homeowners with a comprehensive overview of garage door springs, the spring replacement process, and tips for ensuring optimal results.
A Quick Background on Garage Door Springs
Before delving into the details of spring replacements, let’s do a quick Garage Door Spring 101!
Garage door springs come in two main types: torsion springs and extension springs. Both varieties work to counterbalance the weight of garage doors, using the principle of mechanical advantage. When installed properly, the springs enable easy lifting of even the heaviest overhead doors.
Torsion springs mount to a metal shaft above the garage door. As the door opens and closes, the springs wind and unwind around the shaft, providing lift assistance. These springs come in a variety of sizes, lifting capacities, and configuration options.
Did You Know?
Torsion springs store immense amounts of tension and energy. An average residential torsion spring can exert anywhere from 100 to 200 pounds of force!
Extension springs, on the other hand, stretch and retract along the horizontal component tracks. As the name suggests, extension springs extend when opening the garage door and shorten when closing it. The springs attach to wheel housings at either end, running parallel with the tracks.
Now that we’ve covered the basics, let’s move on to arguably the most important aspect of garage door springs – proper replacements and installations!
Dangers of DIY Garage Door Spring Replacements
Replacing worn out garage door springs seems straightforward enough. Just unhook the old ones and install new ones, right?
Garage door spring adjustments and replacements require extreme care and precaution. The intense forces exhibited can easily crush hands, fingers, and other body parts if something goes wrong.
Additionally, the winding and unwinding poses risks of flying metal shards in case of breakages. Loose springs can even detach and turn into dangerous projectiles.
That’s precisely why Jennings Garage Door Service cautions against homeowners attempting DIY garage door spring replacements unless properly trained and equipped. The results of something going wrong are just not worth the risks involved.
“We’ve seen hundreds of examples of faulty DIY spring replacements over the years,” explains the owner of Jennings Garage Door Service. “Incorrect setups can cause the door to not even budge an inch or come crashing down without warning. Both scenarios can lead to expensive repairs or even serious injuries.”
Our expert Jennings Garage Door Service technicians have years of hands-on training and experience. We use heavy-duty tools and take elaborate precautions when working on springs. Let us handle the replacement process to ensure your safety while getting optimal results.
Now let’s explore the key steps involved in professionally replacing worn out garage door springs.
Step-by-Step Garage Door Spring Replacement Process
The exact replacement process varies slightly depending on the existing spring setup. But these are the typical steps our technicians follow for torsion and extension spring replacements:
Step 1: Pre-Inspection
Our technician will first visually inspect your garage door springs, mounting brackets, cables, pulleys, tracks and other hardware. We check for any issues like metal fatigue or winding imbalances.
The inspection enables creating a replacement blueprint addressing your specific needs. It also helps determine any additional repairs needed.
Step 2: Preparation
Next comes cordoning off the workspace using cones, barriers and warning signs. We ensure no vehicles are parked inside when working with the door tensioned open. All technician tools are also prepped and arranged conveniently.
Proper preparation prevents accidents and lets us focus on safely finishing the complex spring replacement.
Jennings Garage Door Service technicians take every necessary precaution to ensure homeowners’ safety. We restrict access to the workspace and garage interior when replacing springs.
Step 3: Door Release
Releasing the garage door tension poses enormous risks if done incorrectly. We carefully use clamps and winding bars to transfer the door load to the springs before cautiously unbolting it from the opener.
Relieving tension in a controlled manner prevents uncontrolled door dropping or spring uncoiling. We repeat the process in reverse for resetting door tension later.
Step 4: Spring Removal
With the door tension released, we start uninstalling the worn out springs. Extension springs get detached from their mounting points using vise clamps. For torsion springs, we first secure the winding shaft to prevent rotation. Next, the old springs get detached and discarded.
Step 5: New Spring Installation
We slide on the replacement spring ensuring smooth operation within the torsion shaft or extension tracks. Correct positioning and orientation is confirmed based on manufacturer specifications.
The winding shaft gets secured in place again before starting the tension resetting process.
Step 6: Winding Bars & Clamps
Our winding bars, clamps and vise grips allow controlled tightening of springs to achieve optimal tension. We carefully gauge measurements during each 1/4 turn to avoid over-winding.
The manual tension resetting process requires considerable technical finesse and skill. Over-winding risks spring or cable snapping, while under-winding can leave the door unable to open.
Optimal spring tension leaves garage doors balanced without veering up or down from halfway open positions.
Step 7: Safety Checks
Before resetting the automatic opener, our technicians manually raise and lower the door several times. We check for smooth and controlled movements without unusual sounds.
All mounting fasteners get tightened and cables re-examined. We also ensure the door doesn’t drift up or down halfway open.
Step 8: Opener Re-Engagement
Once optimal spring tension and door travel is confirmed, we re-engage the automatic opener. Additional opener calibration may be needed if replacing extension springs.
We demonstrate the new springs by opener-operating the door through a few uninterrupted open-close motions.
Step 9: Work Area Clean-up
Finally, all winding bars, vise clamps and other tools get removed from the workspace. We sweep up any metal shards or debris and haul them away for safe disposal.
The garage interior also gets tidied up before removing all safety cones and warning signs. Any additional cleanup requests get fulfilled as well.
And that concludes the typical garage door spring replacement process by Jennings Garage Door Service technicians. The complexity involved requires considerable skill and precision to get right.
Next, let’s explore the key measurements needed for choosing optimal garage door springs.
Critical Measurements for New Springs
Garage door springs are available in a wide variety of sizes, lifting capacities and configuration options. To determine which new springs your door needs, our technicians carefully measure:
- Wire gauge – Thickness of spring metal wire
- Inside diameter – Interior opening size
- Overall length – Total spring length when relaxed
- Wind direction – Spring winding orientation (left/right)
- End types – Shape of the spring ends
We also factor in the door size, lifting capacity needs, hardware condition and operating environment. All these considerations ensure the new springs have sufficient strength, while avoiding overpowering the opener motor or cables.
“We once encountered a homeowner who purchased and tried installing springs with excess capacity for his lightweight door,” recalls Jennings owner, Christopher Stephens. “It wound up literally ripping apart the entire lifting cable and pulley hardware within days.”
Getting spring specifications right is crucial for durability, safety and functionality.
Jennings Garage Door Service handles measuring existing springs as well as specifying suitable replacements as part of our comprehensive spring replacement service.
Next, let’s explore where you can purchase replacement garage door springs.
Where to Buy Garage Door Springs
Searching for “garage door springs near me” will reveal lots of local retailers. But not all spring sellers are equal in terms of reliability and value.
Big-box home improvement stores often seem like convenient options. However, their spring inventory proves limited for specific garage door needs.
Alternatively, you may find vendors on Craigslist or Facebook Marketplace offering springs and parts. But such sources raise risks of purchasing used/faulty hardware or getting swindled.
For reliably sourcing durable and flawlessly functioning springs, consider these options:
- Reputable Garage Door Showrooms – Stores like Jennings Garage Door Service stock extensive replacement spring selections to fulfill most customer needs promptly. Everything from light to heavy duty stainless steel springs with specialized ends and lift capacities.
- Garage Door Parts Distributors – Various regional and national wholesale vendors focus exclusively on garage door hardware supplies. They offer bulk order discounts to professional dealers and can custom manufacture unusual springs.
- Garage Door Manufacturers – Consulting original equipment manufacturers provides full product specs and availability details. Factory-direct purchases also assure properly engineered springs meeting your exact garage door model’s requirements. However, larger minimum order quantities may apply.
While sourcing springs, consider ordering hardware installation kits for easier replacements. Helper components like winding rods, securing cones, lube and retaining clips minimize guesswork.
How Much Do Garage Door Spring Replacements Cost?
So how much should you budget for replacing worn out garage door springs?
Professional spring replacement costs typically range from $200 up to $500 on average for standard residential doors. Pricing varies based primarily on:
- Spring types needed (torsion or extension springs)
- Size, weight and construction of your specific door
- Location accessibility and complexity involved
- Your LOCAL SERVICE PROVIDER’s experience level and base hourly rates
Keep in mind that many homeowners pay extra by initially attempting risky DIY repairs. For example, incorrect spring installations can damage cables, pulleys or openers needing added repairs.
Choosing Jennings Garage Door Service’s spring replacements as your first option prevents unexpected hassles and added costs down the line.
“Our expert technicians get the job done right the first time, keeping long-term repair and maintenance costs lowest,” – Jennings Garage Door Service
Now that we’ve covered the basics of spring replacements, let’s briefly summarize the key action steps for homeowners.
Next Steps for Homeowners
- Safely inspect your malfunctioning garage door springs to determine replacement needs
- Measure old springs to identify suitable replacements
- Purchase identical or upgraded spring hardware kits
- Schedule professional installations by Jennings Garage Door Service technicians
Equipped with this overview, you now have a better understanding of the garage door spring replacement process.
While the DIY route may seem tempting, we always recommend hiring trained experts like Jennings Garage Door Service. It avoids safety mishaps and ensures restoration of smooth garage access for your family.
Jennings Garage Door Service remains committed to fulfilling all Tampa Metro area homeowners’ needs. Whether you need repairs, spring replacements or new opener installations, our courteous technicians deliver lasting solutions. Contact us today at (813) 955-7813 for a quote or appointment to improve your garage access!